BXNSX - NEY 60
- MSDS: BXNSX
- Manufacturer: NEY J M CO THE
- Product Name: NEY 60
- National Stock Number: 6520-00F041426
Product Identification
Product ID:NEY 60
MSDS Date:09/14/1994
FSC:6520
NIIN:00F041426
MSDS Number: BXNSX
Responsible Party
BLOOMFIELD, CT 06002-5000
US
Emergency Phone: 800-243-1942/203-242-2281
Info Phone: 800-243-1942/203-242-2281
Cage: 43710
Contractor
Telephone: 800-243-1942/203-242-2281
Cage: 43710
Ingredients
SILVER
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 19.9%
OSHA PEL 0.01 MG/CUM
ACGIH TLV: 0.1 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER (DUST & MIST), BRONZE POWDER
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 17.5%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 3%
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SILVER-GRAY SKIN PIGMENTATION.
COPPER-GASTROINTESTINAL TRACT EFFECTS. ZINC-SKIN IRRITANT,
PULMONARY SYSTEM EFFECTS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SILVER-GRAY SKIN PIGMENTATION.
COPPER-GASTROINTESTINAL TRACT EFFECTS. ZINC-SKIN IRRITANT,
PULMONARY SYSTEM EFFECTS.
First Aid
First Aid:REMOVE FROM EXPOSURE, OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Unusual Fire/Explosion Hazard:ZINC DUST & SILVER DUST-MODERATE FIRE
HAZARD.
Accidental Release
Spill Release Procedures:LARGE: USE INDUSTRIAL VACUUM TO CLEAN UP.
MOLTEN METAL SHOULD BE ALLOWED TO SOLIDIFY BEFORE CLEAN UP.
Handling
Handling and Storage Precautions:NONE
Other Precautions:AVOID CUTS & BURNS.
Exposure Controls
Respiratory Protection:USE IAW/NIOSH 29CFR1910 WHEN CUTTING, GRINDING,
SOLDERING/WELDING.
Ventilation:LOCAL EXHAUST WHEN GENERATING DUST, MIST, FUMES TO MAINTAIN
EXPOSURE LIMITS BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Supplemental Safety and Health
APPEARANCE CONT'D: ALLOY PRODUCTS ARE SOLID METALS SHAPED AS WIRE,
PLATE, STRIP/IN FINISHED FORMS AS INGOTS, NUGGETS, ELECTRICAL
CONTACT ASSEMBLIES, SWITCHES/AS OTHER FORMS FOR ELECTRONIC & DENTAL
USE .
Chemical Properties
Appearance and Odor:(SEE SUPPLEMENTAL DATA)
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:MOLTEN METALS SHOULD BE RECLAIMED USING STANDARD
INDUSTRIAL PRACTICES SUCH AS REMELTING & REFINING. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.